Saturday 29 June 2013

 This is the third tote for the swap. Variation on a theme here.




























 It is not necessarily a good colour match here, that is really a very vivid green, and not a turquoise at all!


 The obligatory pockets












Including a zippy pocket.

The three together. I hope these will pass muster on the day.

Now on to the next on my list...

Thursday 27 June 2013

Swap tote arrived!

 Oh look what I was lucky enough to receive!
This lovely parcel arrived from a wonderful swap partner, Liverpool feminist you can link to her flickr stream,  I do not think she has a blog, so I cannot direct you there, but isn't she a star!

Opening the envelope, I am greeted by some texty prints! What have I just received, about a week ago? texty charms!  and then I get a texty tote! how amazing is that!
 I now think, I have not taken the right photos!
I have an interior pocket, on a creamy lining,

then the texty squares run round the top edge of the tote, which is a deep navy for the body of it, and beautifully put together. Simple, sophisticated design, just perfect!

And then the goodies inside!
 A zippy pouch, with those same texty squares on the front, a cheery red zip- put in perfectly, across the front, and a navy back to it.


This zippy pouch was filled with yet more stuff!

Red and orange pezzy print, that red cross hatched print and three lots of plain colours, two sets of ribbon, and a bar of chocolate!

Now, you tell me, did I not do well out of this one?
I hope she gets as good a package as I got!

Tuesday 25 June 2013

mend- it is a four letter word..

Have you ever had one of those garments which relies upon ruching elastic, to give it shape? 


 And then the elastic decides it is going to give up on being , well, elastic?  So instead of a gathered item you have a saggy rag?

saggy elastic
I had a garment like this as a small child. It was a swimming costume. I distinctly recall having it aged about 4. The wretched garment went on and on and on. I wore it for swimming lessons at school aged 11. I hated it, and it was a relief when that one gave way!
 So, a friend of mine also had a garment like that. But in her case it was a rather elegant and pretty dress. In a fine fabric, with beading around the neckline. But it had sagged.

So, the question was, could I fix it? I had never attempted the job of sewing ruching elastic into a garment before, but I knew the principle, and watched a couple of videos on youtube. Which, incidentally, contradicted each other. And I had a bash.

First, though, I had to take out the old elastic!

3 hours later... a pile of old saggy removed elastic ( why is a cigarette coupon from the 1960s in the picture? I welcome guesses, and if anyone gets it right- I will make them a surprise! just the first one to get it right, thank you. )  And then winding ruching elastic onto bobbins. There is an art to this. An art I have yet to master. But I did it. Somehow.

And then to sew elastic back into the dress.
 If you look carefully at this picture, you will see some ends in the middle. No, the bobbin did not run out. The elastic broke. It broke several times. Sometimes I removed it and started again. Other times, I just kept on going, having sorted the bobbin out again.
And one bobbin lasts about three rows across the back.
I eventually got the job finished, and I await information as to whether it is satisfactory. I have no idea what I might do if it isn't, as the elastic sews in at the tension it wants, and there is very little I can do to adjust that!




Latest arrivals in the garden? This peony is now open. She is very frilly and dainty. 
 My little pink rambler is being little and pink...


A hot lily makes a gorgeous rich impact on the eye, and self sown foxgloves grace the ignored corner here.

And I have yet to confess to my other half- but I have signed up for a triple zippy pouch swap! Sign ups go until July 6th, and posting out is in August- 17th I think. I have wanted to do one for a bit- since I saw Annaliese's ones, and this will make me do it!

And a housekeeping note- I got some really lovely text charms through from a texty charm swap group! no Idid not take photos- but go and look at Cindys if you want- they are the same but much better photo's than I can do! One of my daughters has requested a selection for making a new kindle cover! So suitable! Of course she may!

Friday 21 June 2013

Do you do bloglovin?

Curiously enough, several people are already using bloglovin to follow me! I really am thick about these things, but I suspect, it is a next TO DO thing.

So here goes!



Follow my blog with Bloglovin



While I am posting- Tote number two for FQR has  been finished. Somehow I managed to make the back too big- so I had to make another back. So I now have a spare tote back lurking!
The new one looks like this,











and the tote front? 

so, the two so far...


One more to go!

And I know my tote has arrived at it's destination, and get a small idea that it is appreciated by the recipient! Thank you for making sure I know!

I sent a couple of bits with the tote,
just ribbons and stuff, but with a bit of luck, they will come in useful! Favourite colours were lime green and purple, so it makes a very cheery combination. I love purple too, and fell in love with the combination, I may use it again sometime!

Happy tote!



and, as I know my name tag arrived safely, I can show the name!






Thursday 20 June 2013

Kindle Cover

I did this tutorial for Julie, of the Intrepid Thread, She has the most beautiful fabrics, and let me choose a set to make this kindle cover. I am so happy with it, and I hope someone may use this tutorial and make their own! If you do, I would love to see it!
Kindle tutorial for Julie 


We are going to make a neat kindle cover. When I acquired a kindle, I looked at covers. I am a somewhat forgetful soul at times, and the kindle comes with an essential lead, which is required to plug it in and recharge, and may also be useful for loading books onto it. Most covers do not have a useful storage section designed for this lead, and I could see, there was a strong likelihood of losing said lead, and so I need a safe, secure storage for it. Preferably with the kindle itself, so that I do not look at it later and say,
 ‘What the Dickens is that for?’

So for security, I need a zippy pocket. Hold on there a moment, will the zip scratch my kindle? Can’t have that, I will put a flap over the zip.









This cover took me about 3 hours to make, and that was with stopping for photos all the time - it took far, far longer to write the tutorial!
I am an impatient soul, and tend to ‘wing’ it a lot when I sew, but I have tried to make this comprehensive, but sometimes that is less than clear, so
Please read all instructions very carefully, and if you have any questions, contact me directly!



Materials needed,
Outer skin- 12” x 7.5”
Lining-12” x 7.5”
Pocket-10” x 7.5”
Pocket flap 5” x 7.5”
Window 5” x 7.5”, twice. Once in interfacing
 Binding, approx. 48” x 2.5”- a little longer makes life simpler!
Tab 1 ¾ “ x 4” twice- fabric and once in interfacing
Zip, at least 6” long- you can shorten longer zips, but it is very hard to stretch one!
Wadding, I used an iron on wadding, designed for bags.
Button, or magnetic closure, or press stud, if preferred.
Cereal packet- for the cardboard to do your template!

Now, I only have the basic Kindle, and the dimensions are a little different if you have one of the superior models, so do check your dimensions, do not just blithely follow mine, and end up with a giveaway for A.N Other, rather than your own lovely kindle cover!

I made a cardboard template for my kindle, and a paper pattern for the ‘window’ . I also kept my kindle handy, as I could use it to check my details as I went along.
Once these are done, you can get on with the fun bits!



                                                             

First, cut your fabric to size,


With this lovely ‘Down Under’ fabric, from Julie it would have been good to put my animals on the outside, but as the background is white it would get dirty quickly, so I chose to use a darker fabric for that, and the animals as a cute secret for the inside.




Method

Tab


I am afraid I generally make my tabs too long!  So please make yours the length that suits you best!
Cut a template, for the size and shape you want,  And layer the interfacing on the wrong side of one side of the tab- see the image above, Draw round the template and stitch just inside this line.

Now use your male half of the magnetic fastener, and using the washer as a guide, mark the buttonhole places, and make your tiny buttonholes again.

you will see, I have marked the seam allowance round the outside of the tab stitching here,   as a Cutting Guide.








Please make sure you really make those tabs firm with a plier!


As you can see. I put an extra piece of interfacing in for reinforcement.
Then layer up your tab, right sides together, and stitch round on the sewing line again.   You will probably need to use your Zipper foot for this!



Trim neatly, on the cutting line







And make some tiny cuts up to but not through, the stitches – see next image!







This lets you turn it inside out, and get a reasonable curve, rather than something that goes pointy on you!

Use the blunt end of your stitch ripper (the handle!) to really smooth out those curves.



If you prefer a button  and buttonhole, miss out your magnet, and make a buttonhole the right size, after turning tab right sides out!

Outer cover


Take your outer fabric, and your wadding, pin and quilt as preferred,



Now you need to plan your magnet, if you are using one.
Don’t do as I did, and place it too close to the edge, that just makes the binding difficult to sew on, later. Position this at the centre of one short end of the outer, about 1 ¼” in from the edge.

Magnetic fastenings come in 4 parts, 2 washers, and a male and a female part.
Use the washer to mark where the washer needs to be attached, and make tiny little buttonholes, with some interfacing behind for added strength. Pierce the buttonholes, put the female in position, washer on the inside, and fold over the flaps. Use a pliers to secure firmly.


If you are using a button, that can be sewn on right at the end.


Now place tab in position, at the centre of the opposite short side of the outer, you will have half the magnetic fastener at each end. Use your logic, when it folds in half, and you wrap the tab round, the magnetic fasteners should meet!






Window
Use your template/ pattern to mark the corners of the window on your fabric.


please note- there is a wider strip on one side, than the other! This is essential!

These points are going to be your CUTTING guide.
Draw a sewing guide ¼” outside these.

See image below





  Now stitch along the sewing line of each piece separately, for the ‘notch’ at the bottom. This is for added strength, and to reduce the likelihood of stretching in use.


Now layer it up, fabric right sides together, and a piece of interfacing underneath. . Sew along your sewing guide lines of the window only.

At this point, I like to check my window actually fits.

Place your window over your kindle, and trace the outline of the text page with your nail, you will feel it quite easily through the fabric. Adjust now if necessary!
Then you can cut the actual hole! Use those corner marks to assist. You now have a couple of really good size scraps for another project!

Clip into the corners, without cutting the stitches at all, and turn it right sides out.Straight through the window. Feels odd, but it works!




Press firmly.
Now the tricky bits! You see where that pencil line is?


 Carefully cut that out.


And clip into the corners as before..,


  ready for some fiddly ironing?  You need to fold your fabric inside, along those reinforcing seams, and press really firmly. Starch it if possible!

 Topstitch 1/8” from the edges.

Do the same along the long narrow edge, fold in ¼ “and topstitch 1/8” from the edge. Also topstitch round your window, 1/8” from the fold.  Leave your wider margin raw. That will be fine- promise!
Whew! It’s all easy from here…

Pocket and lining
The trickiest bit of this is putting the zip on the back! But, that is not too hard, with what you have already done. Here you go,

Mark your slot, 5“ x ¼ “

Put the pocket piece under your lining piece, right sides together, and sew along the outline of your slot.

Now mark in your slot, as shown in the next photo,


And cut along these lines, careful not to cut through your stitches, but snipping neatly into the corners.
and turn right through your slot



and press well, to give nice crisp edges to your slot.


You now need to lay your zip, symmetrically behind the slot
This is fine, they will be chopped off later, but get your zip pull inside the slot- or how will you open it?

  pin so it will be stable,  ( excuse the fuzzy photo!)

and sew right round your zip, using the zipper foot. You can see the zip ends sticking out here. That is fine!




Fold the pocket up at the back.

 and press.








Pocket flap
Take your pocket flap piece, fold in half, right sides out to give apiece 2 ½” x 7 ½ “.


As you can see- I am of the ‘make it up as you go along, and measure later’ school..


Pin in place, and secure by sewing inside the seam allowance, so these stitches will hide when it is finished. You now have a hidden zip pocket.

At this point you may attach your window also- I know I did it earlier, but it made it slightly unwieldy, so I recommend you do it at this point, instead! Sorry!
The wider, raw edge of the window is at the right hand end of your lining. Check the fit now, as it is easier to adjust now than later. It should be very snug!


Assemble your layers
On your work table, make your sandwich.
place your outer, Right side down. Wadding is up!
Then lay your lining, on this, right side up. If your fabric on your outer is directional, ensure this is doing what you want it to, very frustrating to discover later, that it is upside down! Pin carefully, but sparingly, and stitch right round, @ 1/8” from the edge.

Trim all sides neatly! This will take off your excess zipper ends at the same time.
You will notice I have not left an ‘access hatch’ for the right hand side page turners. This is because the fabric is soft enough that it is not needed. You will be fine like this!






Binding
The total distance round this is 39”. I recommend you make a binding strip at least 48” long! This gives you a little playing room for getting it really neat. If you are an expert, by all means use a piece that is just long enough and no more, but you have been warned!

Bind in your favourite style,or follow me!

Sew strips together to get a long enough overall length,
Fold your binding strip lengthwise, and press. Starching really helps here, too.
Starting in the centre of one side and leaving a reasonable tail, match the raw edges of your kindle cover, and of the binding together, and stitch ¼” from the edge. Stop ¼” from the corner, and secure.
Do that tricksy thing where you fold the long tail up at 90 from the kindle, and then back down to match your new side,









When you get within 3” - 4” of where you started, you need to stop, fasten off and sort out your meeting point.
I prefer not to sew the two ends together. Take one raw end, open it out,



 and turn under ½”, and press 
 fold back together,

 and press again.

 Now, open it out, along the edge of the cover, and sew it in place, open like this

 Trim your other end, so there is about ¾” – 1” overlap, line up accurately, and sew this end down.  fold back over, and sew down securely.  You can catch stitch this fold later if you feel it is needed.













Now fold your binding out from  the kindle cover, and press flat.


 now fold the binding over the raw edges, and pin in place.


Do all the sides, and then come back and play with your corners. You can get a really neat mitre with a little care!

Flatten down the corner, opening it out, as above,

again- sorry about the photo quality!


 and then use your stitch ripper, to get a good fold




And pin this securely.
You may now sew it down, either by hand, or with your machine






Voila!


Related Posts Plugin for WordPress, Blogger...

Popular Posts